Back to top
+918037268267
Send SMS    Call Me Free Send Inquiry
    Trust Stamp
    Product Showcase

    Rotogravure Printing Machine MODEL: ELS STANDARD

    Rotogravure Printing Machine MODEL: ELS  STANDARD
    Rotogravure Printing Machine MODEL: ELS STANDARD
    Send Inquiry
    Product Code : F-15
    Brand Name : Uflex
    Price And Quantity
    • Minimum Order Quantity
    • 1 Piece
    • Price
    • 32500000 INR/Piece
    Product Specifications
    • Printing Speed
    • 300 mm/m
    • Computerized
    • Yes
    • Automatic Grade
    • Automatic
    • Plate Type
    • Gravure
    Product Description

    With over two decades of dynamic existence, experience and expertise, we have emerged as the worldwide manufacturer and exporter of Standard Rotogravure Printing Machine. Ideal for printing various packing materials such as polyethylene, polypropylene bag, cellophane and roll paper, these printing machines are highly demanded in the market. Further, we offer this Standard Rotogravure Printing Machine to our clients at one of the best suitable price range.

    Features:

    • Free of water and oil air pressure
    • Best components
    • Brilliant performance

    Major Composition:

    • Commodity: One complete set of UFLEX make 8 Colour Rotogravure Printing Machine
    • Reel positioning:   Motorized
    • Model: Standard (Self Shaft Chucking System)
    • Simplex unwinder :1set
    • Infeed unit: 1 set
    • Printing unit with drying chamber:8 sets
    • Outfeed unit : 1 set
    • Simplex rewinder :1 set
    • Main drive unit:1 set
    • Control Panel :1 set
    • Standard accessories : 1 set
    • Recommended spare parts: 1 kit

     

    TECHNICAL SPECIFICATIONS

    • No.of color : 8 colors
    • PET 12-23 micron
    • BOPP 15-30 micron
    • PAPER 40-80 gsm
    • MET PET 12-23 micron
    • LDPE 30-80 micron
    • Material tension range 4-25 Kg
    • Web material width: Max. 1020 mm
    • Printing cylinder: Repeat 400-800
    • Unwind dia:  Max- 800 mm
    • Rewind dia:  Max,-800 mm
    • Machine speed: Max.200 M/min.
    • (Machine speed and working speed indicated in this specification sheets are based on Solvent, cylinder condition, coating weight as well as operation skill)
    • Main driving motor :  A.C. motor
    • Machine dimension:  Refer attached lay out drawing
    • Machine color:Uflex Standard
    • Main control: Eurotherm / Siemens / Others*
    • Pne cylinder and fittings :Festo / SMC / Legris / Others*
    • * To be decided by Uflex.

    UTILITIES: 

    • Electric power supply:  415+10%/380V, 50cyclesx3phase, Frequency variation=2%
    • Compressed air :  clean compressed air, free of water & oil air pressure 6-7kg/cm2
    • Cooling water: 200 c(Pressure 2-4Kg/cm2)

    Standard rotogravure printing machine (Model: Rotoflex-Standard)

    BASIC MACHINE COMPOSITION

    SIMPLEX UNWINDER:

    • Construction:Self Chucking Simplex
    • Tension control:By  means of load  cell roller Control drive A.C. motor
    • Paper core:I.D.Dia 3 1/2, (adapter used of 6 ''  core/option) 
    • Paper core fixing  :By Self Shaft Chucking
    • Unwind dia:Max.800 mm
    • Reel positioning: Motorized

    INFEED UNIT:

    • Construction: Single roll press type Infeed cum heat roller (water/electricheater/Thermic) (Customer to specify) steel roller is driven by A.C.motor by means of the tension signal  and synchronize actuating loadcell roller feedback.
    • In-feed roll:
    • Roll press type  : Pressed by air cylinder and voluntary pressure Control is available
    • Roll size:
    • Steel roll: 215mm, Hard chrome plated steel roll
    • Rubber roll  :140 mm, N.B.R.Hardness 75-80o shore 
    • Air cylinder :63x50 mm stroke
    • Drive :By A.C. motor 
    • Tension Control:Load cell roll type

    PRINTING UNIT:

    • Major composition: Printing cylinder (to be provided by buyer)
    • Impression roll (to be provided by buyer)
    • Doctor blade assembly
    • Ink pan
    • * Side lay -hand wheel type
    • Unit drying chamber
    • Main drive
    • Guide rollers
    • Printing cylinder
      • Printing repeat length: 400-800 mm
      • Printing cylinder fixed method: Self shaft chucking
    • Impression roller/each
    • Impression method:By air cylinder to press the impression roll with graduated air  pressure gauge
    • Air cylinder: 63 mm x120 stroke
    • Rubber roll: 140 mm , Solvent resistant rubber covered hardness 70
    • Shaft for the rubber roller: Both side of the shaft for rubber  roller  equipped with bearing. Doctor knife equipment/each 
    • construction: pressure , angle of knife and up-down of the holder canbe adjustable by hand-wheel
    • : left-right oscillation on pivoting eccentric shaft by means of  main gear box (left & right oscillated stroke = 10 mm) 
    • Knife press type  : Knife pressure and fine adjustment will be controlled freely by air cylinder.
    • Air cylinder: 50x25 mm stroke
    • Knife holder: made of aluminum
    • Ink pan part/each
    • Construction  : -located at underneath of printing cylinder and adjustment up and down by the handle -included ink mixing roll device.
    • Ink circulation pump with viscosity controller (optional equipment)
    • Compensating roll part (Register control device)
    • Transverse direction: By adjusting the printing cylinders.
    • Vertical direction: Compensating roll is equipped at the printing  inlet. Register motor control is available.
    • 400mm to 800 mm repeat length 
    • Drying chamber (1-6)
    • Construction: Drying chamber is equipped at each printing unit, hot air via heat exchanger blows onto web through nozzles.
    • Drying chamber on each unit:
    • Opening/closing: pneumatic(air cylinder)
    • No. of nozzle:10
    • Size:1500(L)X1300(W)
    • Heating capacity on each unit
    • Thermal oil system : 84,000 Kcal/hr.,each
    • Temperature range: manual  valve control system
    • Blower on each unit
    • Type: turbo fan
    • Capacity: 3,000 CMH
    • Main driving unit: A.C. motor
    • Guide roller surface of all guide rollers will be specially grooved
    • Material: Aluminum pipe
    • Specification
    • General guide roll : 110 mm
    • Chamber inner roll : 75 mm  )

    OUTFEED UNIT:

    • Construction: Single roll press type
    • Outfeed cum chill roller
    • steel roller is driven by A.C. motor
    • Out-feed roll
    • Roll press type: Pressed by air cylinder and voluntary pressure control is available 

    Roll size: 

    • Steel roll   : 215 mm, Hard chrome plated steel roll 
    • Rubber roll : 140 mm, N.B.R. , Hardness 70 
    • Air cylinder : 63x50 mm stroke
    • Drive: By A.C. motor 

    A.C.  motor

    • Tension Control: Load cell roll type 
    • Inspection lamp box is equipped.
    • Web inspection Video:  1 set  each (OPTIONAL) & Automatic Register Control

    SIMPLEX REWINDER: 

    • Construction:  Self Chucking Simplex
    • Tension control:   By means of load cell roller. Control drive- A.C. motor
    • Paper core :   I.D.Dia 3 , (adapter used of 6 core/option)
    • Paper core fixing:  By Self Shaft Chucking
    • Rewind dia:   Max.800 mm

    CONTROL & OPERATION PANEL UNIT:

    • Main control cabinet controls the each operation panel unit.
    •  Installed A.C. Digital drive system.

    Cabinet

    • Completely wired between main cabinet and operating panel
    • Total Connected Load for 8 Colour :  88.71 Kw

    MACHINE SPECIFICATIONS:

    Machine Specifications

    Number of printing Stations

    Multi Station / As per requirement

    Maximum Web Width

    820/1020/1320

    Unwinder

    Maximum Roll Diameter

    800 mm

    Inside Core Diameter

    76/152 mm

    Direction of Unwinding

    Two Direction unwinding

    Rewinder

    Maximum Roll Diameter

    800 mm

    Inside Core Diameter

    76/152 mm

    Direction of Rewinding

    One Direction

    Typical Material Range

    Polypropylene OPP/BOPP

    10-25 micron

    Polyester

    10-20 micron

    Paper

    40-80 gsm

    Tension Range

    Depends on material

    Speed

    Mechanical Speed

    200 meters / minute

    Trade Information
    • Payment Terms
    • Letter of Credit (L/C), Cash in Advance (CID), Cash Advance (CA)
    • Supply Ability
    • Per Week
    • Delivery Time
    • 12-16 Week
    • Main Export Market(s)
    • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
    • Main Domestic Market
    • All India

    UFLEX LIMITED (ENGINEERING DIVISION)
    X